400 Series Wine Storage Unit Door Adjustment

Topics:

  • Can the door be adjusted on a 400 Series Wine Storage Unit?
  • How to adjust the door panels for a 427
  • 424 Undercounter wine storage door alignment
  • Procedure for adjusting the door of a model 430

Steps to Verify Issue:

The door for a 424 Undercounter Wine Storage unit can be adjusted:
  1. Verify the unit is level before adjusting door.
  2. If a 424FS-2 door needs adjusting, stainless steel wrap must be removed to adjust top cabinet hinge.
  3. If unit is properly installed, blocked and leveled, it may still be necessary to adjust door left to right and/or in and out. Adjustments are performed at top and/or bottom cabinet hinge(s).
    1. Working on only one hinge at a time (top or bottom), remove and discard two small Phillips head shipping screws from cabinet hinge before attempting adjustments.
    2. Using a 1/8” Allen-wrench, loosen and “re-snug” cabinet hinge screws, allowing door adjustment.
    3. Adjust door as required.
    4. After adjusting door, tighten cabinet hinge screws and check for proper door seal.
The door and drawers on models 427 and 427R are not adjustable.
  • Instead, door and drawer panels must be adjusted if there are alignment problems
  • Unit must be level before adjusting door and drawer panels
  • Refer to the product installation guide for further installation information on how to level the unit and adjust panels
The door of a model 430 Wine Storage Unit is adjustable:
  • If unit is properly installed, blocked and leveled, it may still be necessary to adjust door left to right and/or in and out. Adjustments are performed at top and/or bottom door hinge(s)
    1. Working on only one hinge at a time (top or bottom), remove and discard two small Phillips head shipping screws from door hinge before attempting adjustments
    2. Using a 1/8” Allen-wrench, loosen and “re-snug” door hinge screws, allowing door adjustment
    3. Adjust door as required
    4. After adjusting door, tighten door hinge screws and check for proper door seal
Refer to the product installation guide for further installation information.

Answer:

If these steps do not resolve the issue, no further troubleshooting advice is available. Contact Factory Certified Service to schedule an appointment for repair.

Thank you for your request. A Customer Care representative will contact you.

An error occurred. We were unable to submit your request.

Related Questions

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

Call us at (800) 222-7820

Customer Care and Support