Replace Twist-In Style Water Filter

Topics:

  • How to remove, install, or replace the water filter 4204490 on a BI Sub-Zero?
  • What is the replacement water filter part number for a 648PRO?
  • How to replace the water filter in a 648PRO
  • How to remove a non-microbiological water filter, part # 4204490 or 7012975
  • Where is the water filter reset button?

Answer:

To replace a twist-in type water filter on a Sub-Zero product:

  1. Access the water filter by:
    • Classic (formerly Built-In) or 648PRO models: Pull out on the bottom edge of the grille assembly and tilt the grille frame forward.
    • Designer (formerly Integrated) Tall and Column models: Open the refrigerator door. At the top of the interior, pull out on the bottom edge of the water filter door panel and rotate upward.
    • UC-15I Undercounter Ice Maker models: Open the door and find the filter on the bottom-left side. See Undercounter Ice Maker UC-15I Water Filter for more information.
    • All other Sub-Zero models do not have internal water filters. See Sub-Zero Does Not Come with a Water Filter for details.
  2. To remove the old filter cartridge, rotate the cartridge counterclockwise one-quarter turn, and pull it out.
    • There is water in the filter cartridge, so it is normal for a small amount to spill out.
  3. Remove the new filter cartridge from its packaging and carefully remove the plastic cap.
  4. Insert the new filter into the manifold and turn clockwise until the filter is seated.
  5. Reset:
    • Classic models: Once the filter cartridge has been replaced, press and hold the filter reset button (to the left of the water filter) for five seconds in order to reset the water filter life monitor.
    • 648PRO models: Once the filter cartridge has been replaced, the control automatically resets. The water filter life monitor and the "REPLACE FILTER" indicator will no longer appear.
    • Designer models: See Designer Reset Water Filter.
  6. After the new filter cartridge is installed, discard the first full bucket of ice produced. This will help clean the water system and clear air from the line. Allow 24 hours before discarding the first bucket of ice.
  7. For dispenser models, the water line is typically purged before connecting to the unit. However, the first several glasses of water should be discarded after replacing the filter.
  8. The water filter reset button is behind the upper grille next to the filter. Press and hold for 5 seconds to reset.

See also:

If the water filter cannot be removed or installed, no further troubleshooting advice is available. Contact Factory Certified Service to schedule an appointment for repair.

Sub-Zero Classic (Formerly Built-In) - How To Replace the Water Filter

Thank you for your request. A Customer Care representative will contact you.

An error occurred. We were unable to submit your request.

Related Questions

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

Call us at (800) 222-7820

Customer Care and Support