Skip to main content

Designer Series Control Faults | High Voltage System | Bad Micro Communication | Error 90 H 83

Topics:

  • What is error code 90 H 83 on a Designer model?
  • Designer unit flashing H in the display
  • 90 H 83 Error code flashing
  • Control faults high-voltage system bad micro communication

Cause:

  • HV Micro bad (CCM) communication
  • Communication issue with main board

Troubleshooting:

  1. Turn the home circuit breaker to the unit off for 30 seconds then back on again.
  2. Retest the unit operation. If the unit operates without any further errors, no action is required.
  3. If these troubleshooting steps do not resolve the issue, service is necessary to expertly diagnose and repair the product. Contact Factory Certified Service to schedule an appointment for repair.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820