Skip to main content
E-mail This Answer

Replace E Series Double Oven with M Series Double Oven

Topics:

  • What M Series double oven is recommended to replace an E Series DO30-2?
  • Is the M Series Contemporary, Professional, or Transitional Double Oven a direct replacement for the E Series model DO30-2?
  • Installation differences between the M and E Series Ovens
  • What changes have to be made when replacing DO30-2 with an M Series Oven?
  • What are the differences in opening depth, width and height for the E Series and M Series Ovens?

Answer:

Refer to the following chart for compatible replacement M Series Oven Models when replacing an E Series Oven.

DO30-2 Model E SeriesDO30 Model E SeriesDO3050 Model E SeriesM Series Double Oven
DO30-2G/BDO30CE/B/THDiscontinuedDO30CM/B
DO30-2U/S-THDO30TE/S/THDO3050TEDO30TM/S/TH
DO30-2F/S-TH(Discontinued)
DO30-2F/S-PHDO30PE/S/PHDO3050PEDO30PM/S/PH

The following chart regards general compatibility only, and does not take into consideration differences in installation requirements, interior or exterior dimensions, or interior capacity.

 Opening DepthOpening WidthOpening Height
Standard Install
  • No change.
  • M Series = 23 1/4"
  • DO3050 E Series = 23 1/4"
  • DO30, DO30-2 E Series = 24"
  • No change.
  • 28 1/2"
  • May need to change.
  • M Series = 49 7/8"
  • DO3050 E Series = 49 7/8"
  • DO30 E Series = 49 3/4"
  • DO30-2 E Series = 49 5/8"
  • M Series Overall Height = 50 7/8"
  • DO3050 E Series Overall Height = 50 7/8"
  • DO30 and DO30-2 E Series Overall Height = 50 3/8"
Flush Inset Install
  • Cleat change.
  • M Series = 24"
  • DO3050 E Series = 24"
  • DO30, DO30-2 E Series = 25"

Cleat backset:

  • 7/8" = Professional and Transitional M Series, DO3050 E Series
  • 1" = Contemporary M Series
  • 1-1/4" = DO30, DO30-2 E Series
  • May need to change.
  • M Series = 30 1/8"
  • DO3050 E Series = 30 1/8"
  • DO30, DO30-2 E Series = 30 3/8"

Side cleats:

  • M Series = 13/16"
  • DO3050 E Series = 13/16"
  • DO30-2 E Series = 1"
  • DO30 E Series = 15/16"
  • Insignificant change.
  • M Series = 51 1/8".
  • DO3050 E Series = 51 1/8".
  • DO30 E Series = 50 7/8"
  • DO30-2 E Series =50 15/16"

Top cleat:

  • M Series = 1 1/8"
  • DO3050 E Series = 1 1/8"
  • DO30-2 E Series = 7/8"
  • DO30 E Series = 3/4"

Bottom platform:

  • M Series = 1/8"
  • DO3050 E Series = 1/8"
  • DO30-2 E Series = 7/16"
  • DO30 E Series = 3/8"

Electrical supply requirements stay the same, requiring a 50 amp dedicated circuit: 240/208 V AC, 60 Hz, 50 amp circuit.

  • Dependent on location of the original electrical supply outlet, it may or may not need to be moved to accommodate the new unit.
  • A 5' conduit supplied with the unit is 1' longer than the E Series.

Refer to the Wolf Design Guide for additional design specifications.

Related Questions

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820