Skip to main content

Replace M Series Double Oven with E Series Double Oven


  • What E Series Double Oven is recommended to replace an M Series Double Oven?
  • Is the Next E Series Professional, or Transitional Double Oven a direct replacement for the M Series?
  • Installation differences between the M and E Series Ovens
  • What changes have to be made when replacing a DO30CM, DO30TM, DO30PM with a DO3050TE or DO3050PE Oven?
  • What are the differences in opening depth, width, and height for the E Series and M Series Ovens?


Refer to the following chart for compatible replacement E Series Oven options when replacing an M Series Oven.

  • The following chart is regarding general compatibility only and does not take into consideration differences in installation requirements, interior or exterior dimensions, or interior capacity.
  • See also, Wolf Oven Interior Dimensions.
M SeriesE SeriesStandard InstallFlush Inset InstallElectrical
DO30CM/BNo Direct ReplacementOpening Depth
  • No change.
  • Stays the same at 23-1/4".
Opening Width
  • No change.
  • Stays the same at 28-1/2".
Opening Height
  • No change.
  • Stays the same at 49-7/8".
Opening Depth
  • Cleat change for Contemporary DO30CM.
  • The cleat backset changes if replacing a DO30CM, as there is no direct replacement.
  • M Series Contemporary requires 1" backset.
  • E Series, M Series Transitional, and M Series Professional is 7/8".
Opening Width
  • No change.
  • Stays the same at 30-1/8".
  • The side cleats stay the same at 13/16.
Opening Height
  • No change.
  • Stays the same at 51-1/8".
  • Top cleat stays the same at 1-1/8".
  • Bottom platform stays the same at 1/8".
Electrical supply requirements stay the same, a 50 amp dedicated circuit: 240/208 V AC, 60 Hz.
  • Dependent on location of the original electrical supply outlet, it may or may not need to be moved to accommodate the new unit.
  • The 5' conduit supplied stays the same.

Refer to the Wolf Design Guide for additional design specifications.


Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.


Call us at (800) 222-7820