Skip to main content

Cove Dishwasher | Flowmeter FE1 Detects a Pulse When There Is No Active Wash Cycle and the Water Inlet Valve Solenoid SOL1 Is Off | Error 25 01 13

Topics:

  • Cove Dishwasher error code 250113
  • DW24 shows EC 250113
  • 25 01 13
  • Action message on DW24 display
  • Flowmeter FE1 detects a pulse when there is no active wash cycle and the water inlet valve solenoid SOL1 is off

Cause:

  • Flowmeter FE1 detects a pulse when there is no active wash cycle and the water inlet valve solenoid SOL1 is off

Troubleshooting:

  1. Turn the home circuit breaker to the unit off for 30 seconds then back on again.
  2. Retest the unit operation.
  3. If these troubleshooting steps do not resolve the issue, service is necessary to expertly diagnose and repair the product. Contact Factory Certified Service to schedule an appointment for repair.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Related Questions 

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820