Skip to main content

600 CFM Remote Blower - 801640


  • Instruction sheet 99043229A
  • Part number 801640
  • Components included with 801640
  • Installation instructions for 600 CFM remote blower 801640


600 CFM Remote Blower (801640) Installation Instructions detail the installation process.

  • The 600 CFM remote blower, part number 801640, comes with instructions for installation and electrical wiring information.
  • The 600 CFM remote blower draws 120 volts and 2.4 amps. It is an infinite speed control blower (not low, medium, high).
  • It is recommended a 10" round diameter rigid duct is attached from the hood to the blower.
  • The 600 CFM remote blower is not to be installed underneath an eave. It must be installed on a pitched roof or a vertical exterior side wall.
    • The blower will not operate properly when installed horizontally (underneath an eave).
  • The dimensions of the blower housing are 20-3/4" x 20-1/2" x 5".
    • Depth is 5". Box can rotate, so 20-3/4" or 20-1/2" can be width or length depending on installation.
  • The blower box is made of 3003 aluminum.
  • See also:

Refer to the product Installation Guide for further information.

See also:


We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.


Call us at (800) 222-7820