Skip to main content
E-mail This Answer

Sealed Burner Rangetop Infrared Charbroiler

Topics:

  • SRT Rangetop charbroiler
  • Sealed Burner Rangetop charbroiler

Answer:

Infrared Charbroiler

The charbroiler has an infrared burner that transfers intense heat to food, searing the outside to seal in juices. Cook food directly on the charbroiler grate, do not use cookware. The back 7" (178) of the charbroiler is cooler than the rest of the surface. This area can be used to hold foods until they are ready to serve.

  • The charbroiler can be purchased using part number 816363. 
  • Genuine Sub-Zero, Wolf, and Cove parts are available by calling the Factory Certified Parts Distributor in your area. Use Locator to find the Parts Distributor for your area.

Assemble the charbroiler:

  1. To assemble, position the charbroiler frame on the rangetop. Refer to the illustration below.
  2. Align slots of the radiant plate with front angle of the frame. Refer to the illustration below. The slots should fit over the front angle and sit flat on the charbroiler frame.
  3. Install the charbroiler grate.

Charbroiler Operation

The stainless steel cover must be removed prior to operation.

  1. Turn on ventilation.
  2. Push and turn the control knob counterclockwise to HI. The ignitor clicks until the burner is lit.
  3. Allow the charbroiler to preheat for 10 minutes.

Related Questions

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820