Skip to main content

15” Undercounter Ice Maker Ice Production Cycle

Topics:

  • 15” Undercounter Ice Maker ice production cycle
  • How does ice maker use sprayer to make ice?
  • What causes ice maker to stop making ice?

Troubleshooting:

Depending on ambient conditions and water temperature, one ice production cycle takes approximately 30 minutes.

  1. Water fill cycle. The water inlet valve purges old water from the system.
  2. Refrigeration system start-up. The compressor starts after the water fill cycle and stays on throughout the freeze and harvest cycles. The condenser fan motor starts and runs throughout the freeze cycle.
  3. Freeze cycle. Water is sprayed into the inverted cups. The water freezes layer by layer until an ice cube forms in each cup. The control system adjusts the length of the freeze cycle to conditions.
  4. Harvest cycle. The evaporator warms, allowing the cubes to be released and drop into the storage bin. The control system adjusts the length of the harvest cycle to conditions. At the end of the harvest cycle, another freeze cycle begins.
  5. Automatic shut-off. The level of ice in the storage bin controls the automatic shut-off. When the bin is full, ice will contact the bin thermostat, which cools, signaling ice production to stop.
  6. Cycle begins again. When the ice level drops and ice cubes are no longer in contact with the bin thermostat, it will warm, signaling ice production to resume.​

Answer:

Refer to the product Use and Care Guide for further information.

DID THIS ANSWER YOUR QUESTION?

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820