Skip to main content

Speed Oven Installation Hardware


  • Speed Oven (SPO) installation kit
  • Installation hardware for the SPO
  • Part number # 826359


The four mounting screws provided with the Wolf SPO Speed Oven are all that are needed for installation of the unit.

  • Plastic grommets with rubber inserts need to be in place for the mounting screws to work. Order grommets if needed, part # 826411.
    • Part number is for one grommet. Order the quantity needed if more than one are missing.
  • There are no other extra parts or kits needed.

Mounting Screw Location:

  • Prior to serial number 15152412: Taped to the back of the unit.
  • Starting with serial number 15152412: Taped to the top front behind the control panel.
  • Make sure callers have checked the appropriate location for the mounting screws before sending no charge parts.
  • New mounting screws can be ordered using part number 826359 if needed.
  • The mounting screws are 1" T15 Torx head screws.
The 30" models are shipped with four shipping brackets that must be removed before installing. Refer to Wolf Speed Oven Shipping Brackets for more information.

Contact a Factory Certified Parts Distributor to order parts.


Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.


Call us at (800) 222-7820