- Clean the condenser with vacuum
- "Service" is flashing
- Sub-Zero 700 Series or 736 model unit is running constantly or not cooling
- Is there a chemical cleaner or degreaser that can be used to clean the condenser?
- Can the screen cage in front of the condenser be removed?
- Can the filter screen blocking the condenser be removed?
Clean the condenser every six to twelve months. Failure to clean the condenser could result in temperature loss or mechanical failure or damage.
Use the video or read more about cleaning the condenser below.
If further instruction is needed, use these instructions to clean the condenser:
- Address any error codes on the control panel display first. Search for information about the specific error to resolve it.
- Press UNIT ON/OFF on the control panel to turn the unit off.
- Remove the louvered kickplate.
- For IC-27 Column models, open the door to access the kickplate.
- Remove the lower drawer 700 Series Tall units for more room if necessary.
- 700 Series Drawer Removal
- Use a soft bristle brush attachment and vacuum to remove dust and lint from the condenser area.
- A paint brush, air compressor on a low setting, or a can of compressed air also work to clean the condenser.
- Condenser cleaning chemicals and degreaser are available from several suppliers and online. They are not necessary to clean a Sub-Zero condenser and are not recommended by Sub-Zero.
- If there is a build-up of dust or debris behind the screen that the vacuum does not reach, use an air compressor on a low setting or a can of compressed air to blow the condenser clean.
- Turn the unit on and monitor temperatures. It may take up to 24 hours for temperatures to return to normal after condenser cleaning.
- For additional information, refer to:
- If there was temperature loss or mechanical issues and these steps do not resolve the issue, no further troubleshooting advice is available.
- Contact Factory Certified Service to schedule an appointment for repair.
- Share any service indicators and current temperatures with the service company.
DID THIS ANSWER YOUR QUESTION?
Thank you for your request. A Customer Care representative will contact you.
An error occurred. We were unable to submit your request.
We're standing by with answers
Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.
Call us at (800) 222-7820